The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.

The MTSM offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at the transition points between the two members. The MTSM is load rated for installation on both grout-filled CMU (GFCMU) and concrete.

Simpson Strong-Tie straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference. The MTSM Twist Strap offers a high-strength truss to masonry connection.

Simpson Strong-Tie N8DHDGR 8D x 1-1/2 In. Hot Dipped Galvanized Nails, 1LB

Simpson Strong-Tie Retrofit Bolt, Series: RFB, 5/8 in dia, 5 in OAL, Low Carbon Steel, Hot Dipped Galvanized, UNC, 2220 lb Shear Strength, 1390 lb TensileRFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry. Each end of the threaded rod is stamped with rod length in inches and our inNo-Equal in symbol for easy identification after installation.

Zmax, 18 gauge, 2x galvanized rigid tie connector.

STRUCTUAL SCREW #10 1-1/2

The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie products. In certain applications screws are easier and more convenient to install than nails, and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.

Simpson Strong Tie Strong Drive SDS Heavy-Duty Connector screw is ideal for various installations as well as wood-to- wood connections. Improved designs with a patented CUT point to reduce installation torque and makes driving easier.

The stud-plate tie series offers various solutions for connecting the stud to the top and bottom plates. The SP1 and SP2 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections while the SP2 is for the double-top-plate-to-stud connection. These stud-plate ties feature angled holes for a positive connection from the stud to the plates.

The stud-plate tie series offers various solutions for connecting the stud to the top and bottom plates. The SP1 and SP2 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections while the SP2 is for the double-top-plate-to-stud connection. These stud-plate ties feature angled holes for a positive connection from the stud to the plates.

SIMPSON STUD PLATE TIE

Custom designed charms
Gold and silver tone finish
Enamel icon with funny phrases
6 relatable designs

MAT GRIPPERS RESUABLE

THREADED ROD 1/4-20 X 36 STAINLE